VitaFlush formula contains the latest achievement in the field of resource-saving technologies – a unique substance - revitalizant (from Latin “vita” – life).

  

   Adding revitalizant into motor oil gives the possibility to form a cermet coating in the places of maximum wear under regular operating mode.

Every time you change used oil you move away small metal parts which have been abraded from different rubbing surfaces (ring – cylinder, shaft journal – bush, etc.). 

Formerly it was an irreplaceable loss for the engine itself and forthcoming repair could be figured out by the number of oil changes. Thus 4 liters of used oil contain about 3 grams of metal. The calculation is very simple. The reason for major repair is the loss of about 60 grams of metal in the engine with working volume 1800 cc! But now due to the invention of revitalization effect it is possible to return up to 70% of the lost metal! That is why VitaFlush formula contains parts of revitalizant. During the short period of action they have time to find and place back nearly all the smallest parts of metal using them as a building material for cermet coating in places of probable wear! Now the lifespan of engine parts will be much longer as they are protected with XADO revitalizant!

Benefits of VitaFlush application

• restoration and wear protection of friction parts;
• complex cleaning of oil system;
• reconditioning of oil and compression rings operation;
• elimination of hydraulic compensator sticking effect;
• stabilization of oil pump characteristic (increase of oil pressure);
• cleaning of crank case ventilating system;
• increase of engine power.

 

Application procedure of VitaFlush cleaner  (can 430 ml)

1.    Rated dosage of Vita Flush: 60 ml. (2 fl oz) per 1 liter (1 qt) of oil.
2. One can of Vita Flush (430 ml/14.5 fl) is sufficient for two flushings of engines with the oil system up to 4 l (4 qt).
3. Add the necessary quantity of VitaFlush into the oil mouth of the warmed up engine. Drive no less than 20 km or idle 10 - 15 min. Change oil and oil filter.

Application procedure of VitaFlush cleaner  (packet 20 ml)

1.    Add the necessary quantity of VitaFlush into the oil mouth of the warmed up engine. 
2.    Start the engine, idle 10 - 15 min or drive no less than 20 km.
3.    Change oil and oil filter.

Note

General notes.