Refrigeration Oil 100 Atomic Oil



XADO Refrigeration Oil 100
The best synthetic oil for automitive air-conditioners.
Contains atomic revitalizant.
XADO Refrigeration Oil 100 has excellent lubricating properties, high adherence to the part surfaces, chemical and hydrolytic stability. Specially designed for car air-conditioners with refrigerant R-134a (for cars produced since 1993). Applied to domestic and industrial air-conditioners. The oil is easily mixed with HFC refrigerants R-134a (404a, 407c, etc.). Compatible with all types of materials and can be mixed with any type of oil applied to car air-conditioning systems.
Advantages
- improves compressor power and its efficiency due to the high-accurate local adjustment of parts to each other;
- increases conditioner efficiency by 5
- extends life span of a compressor by 2-3 times and compensates current wear of its parts;
- damps extreme loads, reduces noise and vibrations;
- takes care of compressor parts and units from the very start of compressor operation, protects them from overloads.
Base
Formulated on the base of synthetic esters and complex of special additives. Contains atomic revitalizant.
Application and dosage:
Use service equipment to fill an air conditioner with the oil (service plant for refrigerants, special filling cylinder) according to the manufacturer’s instructions.
The quantity of the oil which should be filled into the air-conditioning system is indicated in technical specifications for a car and it is usually 130-300 g. As a rule it is not more than 1/4 from the volume of the filling refrigerant.
For example,
| a car | quantity of oil, g | quantity of R-134a, g |
| Skoda Fabia 1,4 produced since 1999. | up to 135 | 550±25 |
| Skoda Octavia 1,8 T produced since 1996. | up to 190 | 750±50 |
| Opel Vectra C 2,2 produced since 2003. | up to 185 | 730 |
XADO Refrigeration Oil 100 exceeds the performance level of polyalkyleneglycol oils (PAG) which are usually used in car air-conditioners with R-134a and is completely compatible with them.
Meets the requirements:
ISO-VG 100
Technical information:
| Density at 15 °С, kg/l | 1,064 |
| Viscosity at 100 °С, mm2/s | 13,0 |
| Viscosity at 40 °С, mm2/s | 100,0 |
| Viscosity index | 127 |
| Flash point, 0С | 260 |
| Pour point, °С | <-40 |
| Water content, ppm | <50 |
| Total acid number, mgKOH/g | 0,0 |





